14226900-IG, Edition 10.0
July 2017, Original document
67
Settings
Settings offer you the opportunity to customize the handset according to your needs. The settings
can be changed at any time.
Ringing Volume
To Adjust the Volume of the Ring Tone
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Ringing volume and press Select.
4. Press the left or right side of the navigation key to adjust the volume of the ring tone.
5. Press Set.
Ringing Tone
The ring tone is followed by a number indicating the chosen tone of the ringer. It is possible to choose
between 12 different ring tones. The last two ring tones are suitable for noisy environments. You can
distinguish between an internal and external call by the ring tone. The ring tone of an internal call is
followed by three short beeps (system dependent feature).
To Choose a New Ring Tone
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Ringing tone and press Select.
4. Scroll to the desired ring tone and press the right side of the navigation key to listen to the
ring tone. Repeat the process if you want listen to other ring tones.
5. Press the left side of the the navigation key to listen to the internal calls ring tone (system
dependant feature).
6. Scroll to the desired ring tone and press Change to select the new ring tone.
Note:
If you cannot hear the ring tones, check that Silent mode is turned off.
Spectralink 7522/7532 Handset User Guide
To Next Page
Loading...
