SpectraLink 7522 - Battery; Ringer Tone; Volume

14226900-IG, Edition 10.0
July 2017, Original document
65
Battery
The battery function shows remaining battery capacity.
The indication on the display is not necessarily an exact reflection of the remaining speech time, but
only an indication of the voltage on the battery.
To Check Remaining Battery Capacity
1. Press Menu to enter main menu.
2. Scroll to Status and press Select.
3. Check the battery indicator.
Ringer Tone
The ring tone is followed by a number indicating the chosen tone of the ringer. It is possible to choose
between 12 different ring tones. The last two ring tones are suitable for noisy environments. You can
distinguish between an internal and external call by the ring tone. The ring tone of an internal call is
followed by three short beeps (system dependent feature).
To Choose a New Ring Tone
1. Press Menu to enter main menu.
2. Scroll to Status and press Select.
3. Scroll to Ringing tone and press Select.
4. Scroll to the desired ring tone and press the right side of the navigation key to listen to the
ring tone. Repeat the process if you want listen to other ring tones.
5. Press the left side of the navigation key to listen to the internal calls ring tone (system
dependant feature).
6. Scroll to the desired ring tone and press Change to select the new ring tone.
Note:
To listen to the ring tone, Silent mode must be set to off.
Volume
Adjusts ringing volume according to the noise level of the surrounding environment.
To Adjust the Volume of the Ring Tone
1. Press Menu to enter main menu.
2. Scroll to Status and press Select.
3. Scroll to Volume and press Select.
4. Press the left or right side of navigation key to adjust the volume of the ring tone.
5. Press Set.
Spectralink 7522/7532 Handset User Guide