14226900-IG, Edition 10.0
July 2017, Original document
82
8. If the system in use is removed, it is necessary to select one of the remaining systems or to sub-
scribe to a new one.
Creating a Login
To create a login, the system must allow subscriptions to be made. Some systems also require an
Authentication Code (AC). You can create a login by performing a search for a system. If more than
one system currently permits subscription, you will need to know the ID of the system to which you
want to subscribe. Authentication Codes and system ID’s will be provided by the system admin-
istrator.
You can subscribe up to 15 different systems, meaning that you can create 15 logins.
To Create Login by Searching for System
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Advanced and press Select.
4. Scroll to Login and press Select.
5. Scroll to Create login and press Select.
6. When Search is selected, press Select. The handset will start searching for a system.
7. Scroll to the relevant system and press Select.
8. If required, enter an AC Code and press Ok to connect to the system.
9. Press Ok.
Note:
If the handset is already subscribed to 15 systems, you will have to remove a subscription
before creating a new subscription.
Activating Automatically Login
Note:
To activate auto login your handset must be subscribed to at least two systems.
Auto login should only be used when systems are separate, with no overlaps.
When auto login is turned on, the handset automatically change to another system when necessary.
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Advanced and press Select.
4. Scroll to Login and press Select.
5. Scroll to Auto login and press Select.
6. If Off is selected, press Change to select On.
The handset automatically selects a system. The selected system is marked with an A.
Spectralink 7522/7532 Handset User Guide
To Next Page
Loading...
