3-12 Chapter 3: Configuring the Micro800 Expansion I/O 2085-OX32-SC Using CCW
User’s Manual Pub. 0300309-01 Rev. A
0×0000 in Micro850 Series A & B PLCs and Micro870 Series A PLC.
3.6.3 Communication Errors
If there is communication error between PLC and module, the following error
will be displayed in CCW:
Technical Assistance
Note that your module contains electronic components which are susceptible to
damage from electrostatic discharge (ESD). An electrostatic charge can
accumulate on the surface of ordinary plastic wrapping or cushioning material. In
the unlikely event that the module should need to be returned to Spectrum
Controls, please ensure that the unit is enclosed in approved ESD packaging
(such as static-shielding / metalized bag or black conductive container).
Spectrum Controls reserves the right to void the warranty on any unit that is
improperly packaged for shipment.
RMA (Return Merchandise Authorization) form required for all product returns.
For further information or assistance, please contact your local distributor, or call
the Spectrum Controls Technical Support at:
For Rockwell Automation Compatible I/O Products:
• USA 440-646-6900
• United Kingdom 01908 635230
• Australia 1800-809-929
• Mexico 001-888-365-8677
• Brazil (55) 11 3618 8800
• Europe +49 211 41553 63
or send an email to
support@spectrumcontrols.com
Declaration of
Conformity
Available upon request.
To Next Page
Loading...
