To Next Page

To Previous Page

SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL

CALIBRATE

Use this menu to calibrate controls. After making physical changes to the transmitter, such as changing the

wheel, calibrate the transmitter.

1. Move the Steering Wheel, Throttle/Brake and the knob from stop to stop.

2. Save when ﬁ nished or cancel to go back.

SETTINGS (CONTINUED)

Press and hold the scroll wheel while powering on the transmitter

to show the System Setup list. No radio transmission occurs when

a System Setup screen is displayed, preventing accidental damage

to linkages and servos during changes to programming.

UTILITIES

MODEL SELECT

MODEL UTILITIES

Model Select enables you to access any of the 20 internal model memory locations in the Model Select list.

1. Scroll to the desired model memory in the Model Select list.

2. When the desired model memory is highlighted, click the scroll wheel once to select the model. The

transmitter returns to the Main Screen.

3. Add a new model by rolling to the bottom of the list. You will then be prompted with the Create New

Model screen.

CAUTION: NEVER change the model in Model Select while operating a model. Changing the model memory

interrupts the transmitter signal to the receiver and may cause loss of vehicle control, damage or personal injury.

In the Model Utilities function you can create a new model, delete a model, copy a model, reset a model to default

settings and sort the model list. If the DX5C is updated, use the Validate All selection to ensure model settings are

updated to be fully compatible with the new ﬁ rmware. The Delete All selection will delete all model settings.

The System Setup menu can also be accessed from the Function list.

A CAUTION screen will appear that warns that RF will be disabled

(the transmitter will no longer transmit). Press YES to access the

System List. If no selection is made, the system will exit to the

main screen within approximately 10 seconds.

WARNING: Do not press YES to enter the Utilities menu

unless the model is turned off and secured.

Spectrum DX5C User Manual

Questions and Answers: