Spectrum DX5C - PHYSICAL TRANSMITTER ADJUSTMENTS; STANDARD WHEEL CONVERSION; STEERING TENSION ADJUSTMENT; DATA PORT

16
SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL
EN
PHYSICAL TRANSMITTER ADJUSTMENTS
• Using a 1.5mm hex wrench, remove the steering wheel.
• Re-install the steering wheel.
STANDARD WHEEL CONVERSION
STEERING TENSION ADJUSTMENT
Turn the screw clockwise with a small Phillips screw driver to
increase the steering tension.
DATA PORT
The data port gives drivers access to future updates. Register-
ing the transmitter is neccesart for updates. Updates require the
SPMA3065 updater cable (not included and a PC.
DATA PORT