EasyManuals Logo

Spectrum DX6 User Manual

Spectrum DX6
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
EN
Battery and Charging Precautions and Warnings
Failuretoexercisecautionwhileusingthisproductandcomplywiththefollowingwarningscouldresultinproductmalfunction,electrical
issues,excessiveheat,FIRE,andultimatelyinjuryandpropertydamage.
• NEVER LEAVE THE BATTERY AND CHARGER UNATTENDED DURING USE
• NEVER CHARGE BATTERIES OVERNIGHT
• Read all safety precautions and literature prior to use of this product
• Never allow minors to charge battery packs
• Never drop charger or batteries
• Never attempt to charge damaged batteries
• Never attempt to charge a battery pack containing different types of batteries
• Never charge a battery if the cable has been pinched or shorted
• Never allow batteries or battery packs to come into contact with moisture at any time
• Neverchargebatteriesinextremelyhotorcoldplaces(recommendedbetween50–80˚For10–27˚C)orplaceindirectsunlight
• Always disconnect the battery after charging, and let the charger cool between charges
• Always inspect a new battery before charging
• Always terminate all processes and contact Horizon Hobby if the product malfunctions
• Always keep batteries and charger away from any material that could be affected by heat (such as ceramic and tile), as they can
get hot
• Always end the charging process if the charger or battery becomes hot to the touch or starts to change form (swell) during the
charge process
INSTALLING OPTIONAL LITHIUM ION BATTERY PACK
BATTERY AND CHARGING PRECAUTIONS AND WARNINGS
1. Remove battery cover from the back of the transmitter.
2. Remove the AA battery holder and disconnect from the
transmitter power port.
3. Remove the Rectangle shaped foam and flat foam from the
battery compartment.
4. Connect the battery pack (SPMA9602) to the
transmitter power port.
5. Install the optional Lithium Ion battery pack into the
transmitter.
6. Install the battery cover.
NOTICE: When installing a Lithium Ion battery pack, always
set the battery chemistry to Lithium Ion in the Systems
Setting screen to correctly set the low voltage alarm.
CAUTION:Riskofexplosionifbatteryisreplacedbyanincorrecttype.Disposeofusedbatteriesaccordingtostateandlocallaws.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Spectrum DX6 and is the answer not in the manual?

Spectrum DX6 Specifications

General IconGeneral
Channels6
ModulationDSMX/DSM2
Model Memory250
RF Power100mW
DisplayLCD
Battery4 AA batteries

Related product manuals