SpeedyBee BEE25 - Page 6

By connecting to BEE25 with the SpeedyBee app, you can easily watch the
corresponding binding guide videos. Ensure your drone's flight frequency
is set correctly to avoid interference or unnecessary flight issues.
Operation Steps:
1. Use the SpeedyBee app to connect to BEE25.
2. In the app interface, select "Binding Guide" in the bottom right corner of
the "Toolbox" to start watching the corresponding binding tutorial video.
*Note：Before performing PNP wiring, ensure you
understand the definition of the pre-reserved lines
on the drone and the soldering pads on the receiver.
Binding Guide
The PNP wiring guide will help you correctly connect the pre-reserved
connectors on the drone, ensuring the wires in the accessories are properly
soldered to the receiver for optimal flight performance.
PNP Wiring Guide
FC Denition
GND
TX
RX
5V
对频指引