Speler SP-LED40 User Manual (English)

Other manuals for Speler SP-LED40

Questions and Answers:

Y
Yolanda SpearsAug 1, 2025
What to do if the Speler SP-LED40 remote control is not working?
- R
  Raymond MillerAug 1, 2025
  If you can't perform operations with the remote control, check the following: * Ensure the batteries are installed with the correct polarities. * Replace exhausted batteries with new ones. * Point the remote control at the remote sensor on the TV and try again. * Operate the remote control at a distance of less than 6m from the TV's remote control sensor. * Remove any obstacles between the remote control and the remote control sensor on the TV.
M
Michael TerryAug 6, 2025
Why is there no sound on my Speler SP-LED40 LED TV?
- K
  kbakerAug 6, 2025
  If there is no sound or poor sound on your Speler LED TV: * Check the audio settings. * Press the MUTE button on the remote control to cancel the mute function. * Unplug any headphones that may be connected.
S
Stephanie BakerAug 11, 2025
How to improve poor picture quality on Speler SP-LED40?
- W
  William ParkerAug 11, 2025
  To improve poor picture quality on your Speler LED TV: * Adjust the antenna or use an external antenna. * Relocate the unit near a window if inside a building. * Move subjects that cause interference away from the TV. * Do Auto Tuning again. * Try another channel.
M
michael77Aug 16, 2025
What to do if Speler SP-LED40 key operations are not effective?
- L
  Laura NelsonAug 16, 2025
  If no key operation is effective on your Speler LED TV (either by the main unit or the remote control), disconnect the power cord from the power source and then reconnect it.