Spengler PSL50 Series - Reassemble Monobrewer

18
CL & PSL50 Series
Step 5: Reassemble monobrewer
SERVICE TASKS
From back of monobrewer, slide
grounds scraper into its track
and push it forward until scraper
surface extends past chamber base.
Reinstall grounds guide (A) into its
track partway. Reinstall chamber top
(B) into brewer. Set aside.
Insert chamber base into bottom of
brewer. Rotate exposed gear cog
at back of monobrewer to adjust
internal components if needed.
02
01
03
A
B