Spengler PSL50 Series - Step 18: Reinstall Canisters

31
CL & PSL50 Series
REASSEMBLY
Step 18: Reinstall canisters
Clip the chutes back onto the canister
outlets (keep the outlets pointed up
for now).
01
Replace the canister(s) into the
correct location(s). Make sure that the
canister alignment pin is tted into the
canister shelf and sitting ush inside
the dispenser.
Rotate the canister chute(s) down so
that they point directly into the mixer
bowl(s). Then rotate the canister
lock(s) so they point straight down.
02
04