21
CL & PSL50 Series
WARNING:
When working with electrical
components, always turn the
dispenser OFF at the main switch,
or disconnect the plug from the
outlet, to prevent risk of electrical
shock.
SERVICE TASKS
Step 8: Replace grinder soft ring (annually & biannually), adjustment ring (biannually only)
Remove grinder soft ring and replace
with new.
Take note of coarseness setting, then
remove adjustment ring by rotating
it counterclockwise (when viewed
from top) several times until it
releases from grinder.
Remove remaining beans in grinder
inlet, then thread on new adjustment
ring to previous coarseness setting.
Place new grinder soft ring on top of
new adjustment ring.
To Next Page
Loading...
