Spin pro Series - English; Introduction; Controller SPIN Pro

www.modellmarkt24.ch
SPIN SPIN
PROPRO
All controllers (except OPTO types) contain a new type of voltage regulator for supplying
the receiver and servos, the so called switched BEC. Owing to this element, a considerable
increase of applicability of controllers with BEC towards higher numbers of flight battery
cells could be achieved. Another advantage is the independence of number of servos from
the input voltage.
The series SPIN pro controllers are successors of the former brushless series SPIN
controller family. The new line with the attribute PRO offers in comparison with the
predecessors increased adjustment possibilities like automatic motor timing, directly in
volts practicable shut-off voltage adjustments, tuning of start-up properties for different
motor types as well as new possibilities of mode activation for setting up autorotation of
helicopters. The power range of SPINpro controllers is the same as provided by the former
SPIN family ranging from 11A to 300A.
1.1 Controller SPIN pro
1. Introduction
Type
Sustained
current
[A]
Input
Voltage
[V]
BEC
[A]
BEC
[V]
Dimensions
[mm]
Weigt
[g]
SPIN 11 pro
11
5 - 17
2,5
5,5
32x23x6
12
SPIN 22 pro
22
5 - 17
2,5
5,5
32x23x7
26
SPIN 33 pro
33
5 - 21
3
5,5
42x23x7
32
SPIN 44 pro
44
5 - 26
5
5,5
52x25x10
44
SPIN 55 pro
55
5 - 34
5
5,5
52x25x12
60
SPIN 66 pro
70
5 - 26
5
5,5
52x25x12
56
Basic parameters of SPIN controllers with BEC:
English
17
www.modellmarkt24.ch