EasyManua.ls Logo

Spirax Sarco EP5 Series - Safety Information; Intended Use; Access and Lighting; Hazardous Conditions

Spirax Sarco EP5 Series
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.568.5275.226
2
1. Safety information
Safe operation of these products can only be guaranteed if they are properly installed, commissioned,
usedandmaintainedbyqualiedpersonnel(seeparagraph1.11)incompliancewiththeoperating
instructions.Generalinstallationandsafetyinstructionsforpipelineandplantconstruction,aswell
astheproperuseoftoolsandsafetyequipmentmustalsobecompliedwith.
WARNING: The maximum process uid temperature must be suitable for use if the
unit is to be used in any potential explosive atmosphere. For the device maintenance
inapotentiallyexplosiveatmosphere,werecommendtheusageoftoolswhichdonot
produce and / or propagate sparks.
1.1 Intended use
Referring to the Installation and Maintenance Instructions, name-plate and Technical Information
Sheet, check that the product is suitable for the intended use / application. The products comply
withtherequirementsoftheEuropeanDirective2014/34/EU(ATEX).
1.2 Access
Ensuresafeaccessandifnecessaryasafeworkingplatform(suitablyguarded)beforeattempting
toworkontheproduct.Arrangesuitableliftinggearifrequired.
1.3 Lighting
Ensureadequatelighting,particularlywheredetailedorintricateworkisrequired.
1.4 Hazardous liquids or gases in the pipeline
Considerwhatisin thepipeline orwhat mayhave beenin thepipeline atsome previoustime.
Consider:ammablematerials,substanceshazardoustohealth,extremesoftemperature.
1.5 Hazardous environment around the product
Consider:explosion riskareas, lack ofoxygen (e.g.tanks, pits),dangerous gases,extremes of
temperature,hotsurfaces,rehazard(e.g.duringwelding),excessivenoise,movingmachinery.
1.6 The system
Considerthee󰀨ectonthecompletesystemoftheworkproposed.Willanyproposedaction(e.g.
closingisolationvalves,electricalisolation)putanyotherpartofthesystemoranypersonnelatrisk?
Dangersmightincludeisolationofventsorprotectivedevicesortherenderingine󰀨ectiveofcontrols
oralarms.Ensureisolationvalvesareturnedonando󰀨inagradualwaytoavoidsystemshocks.
1.7 Pressure systems
Ensurethatanypressureisisolatedandsafelyventedtoatmosphericpressure.Considerdouble
isolation(doubleblockandbleed)andthelockingorlabellingofclosedvalves.Donotassumethat
thesystemhasdepressurisedevenwhenthepressuregaugeindicateszero.
1.8 Temperature
Allowtimefortemperaturetonormaliseafterisolationtoavoiddangerofburns.
1.9 Tools and consumables
Beforestartingworkensurethatyouhavesuitabletoolsand/orconsumablesavailable.Useonly
genuine Spirax Sarco replacement parts.

Related product manuals