39
10.7 Output technical data
24 Vdc supply
Maximum voltage 26.4 Vdc
Maximum current 25 mA
Ripple voltage 10 mV @ 264 V, full load
4 - 20 mA
Minimum current 0 mA
Maximum current 20 mA
Open circuit voltage (maximum) 19 Vdc
Resolution 0.1% FSD
Maximum output load 500 ohm
Isolation 100 V
Output rate 10 / second
Relay(s)
Contacts 2 x single pole changeover relays (SPCO)
Voltage ratings (maximum) 250 Vac
Resistance load 3 amp @ 250 Vac
Inductive load 1 amp @ 250 Vac
ac motor load
¼ HP (2.9 amp) @ 250 Vac
1
/
10
HP (3 amp) @ 120 Vac
Pilot duty load C300 (2.5 amp) - control circuits / coils
Electrical life (operations) 3 x 10
5
or greater depending on load
Mechanical life (operations) 30 x 10
6
Infrared
Physical layer IrDA
Baud 38400
Range 10 cm
Working angle 15°
Eye safety information
Exempt from EN 60825-12: 2007 safety of laser products
- does not exceed the accessible emission limits (AEL)
of class 1
To Next Page
Loading...
