Spirax Sarco UFT32 Installation And Maintenance Instructions

IM-P146-01 CMGT Issue 4
11
7. Spare parts
Fig. 5
The UFT32 is a sealed non-maintainable trap unit. No internal spares are available.
The spares which are available are shown in heavy outline.
Parts shown in a grey line are not supplied as spares.
Available spares
Connector screws (x 2) 3
Complete UFT32 trap unit inclusive of gaskets and connector screws (3)
Note: Specify the model number and differential pressure of the trap, eg, UFT32-4.5.
How to order spares
Always order spare parts by using the description given in the column headed 'Available spares' and state
the size, model no. and pressure rating of the trap.
Example:
2 off connector screws for a Spirax Sarco UFT32 sealed stainless steel ball float steam trap (for use with
pipeline connectors).
Table 1 Recommended tightening torques
Item Part
or
mm
N m (lbf ft)
3 Connector screws 9/16" A/F 30 - 35 (22 - 26)
3
UFT32 trap unit and gaskets

Spirax Sarco UFT32 Specifications

General

Brand	Spirax Sarco
Model	UFT32
Category	Control Unit
Language	English