Spiricon LBA-300 - Page 199

• Turn on/off write protection
The following example describes how to retrieve the frame status of frame number 27.
Host sends
:FST?
FrameNumber=27(^END)
LBA-PC sends
FST
FrameNumber=27;
CameraInput=0;
Date=11/24/97;
Time=03:17:55.16;
PixelBits=8;
PixelHScale=1.300e+01;
PixelVScale=1.300e+01;
PixelUnits=1;
Gamma=1.000e+00;
Lens=0;
PixelBitsFraction=7;
CaptureLocation=32,44;
CaptureSize=128,120;
CaptureResolution=2;
EnergyOfBeam=0.000e+00;
EnergyOfFrame=0.000e+00;
EnergyUnits=2;
AC=1;
RS=0;
GC=0;
CommentLine=This is a test shot;
WriteProtect=0(^END)
The following example describes how to set a frame comment and write protect frame number
52.
Host sends
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
199
:FST