Spiricon LBA-300 - Load Colors; Clearing Colors

Note: Palettes saved as .pal file types cannot be loaded into the Palette Generation Tool (PaletteGen2.exe) for
editing!
3.2.10.3 Load Colors
The Load Colors button is used to load the seed colors from .sp2 files into the Palette
Generation Tool for editing.
Note: Users should save a .sp2 file for each .pal file they desire to tweak at some later date.
3.2.10.4 Clearing Colors
Removes all seed colors and resets the palette display.
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
97