Passeq Analog Code
®
Plug-in
7
Basics
Introduction
Operation
M/S Mode: as an alternative to L/R processing you can also switch
to M/S mode for processing the mid and side information of a
stereo panorama. Read more on page 15 (“M/S”) and 28 ff (“M/S
Basics”).
Mouse wheel control for all rotary knobs
All SPL Analog Code plug-ins support mouse wheel control for
rotary controls and faders. Place the mouse cursor over a rotary
control and move the scroll wheel of your mouse to adjust the set-
ting. Hold the CTRL (Windows) or COMMAND (Apple) key while
moving the scroll wheel to make fine adjustments; the resolution
of the mouse wheel is increased, making fine-tuning easier.
Keyboard Shortcuts
All SPL Analog Code plug-ins support format and OS specific func-
tions for value reset, fine adjustment and mouse control. For more
detailed information please refer to the host program’s documen-
tation.
Mono, stereo or multi-channel operation
The Passeq plug-in can be used either for mono or stereo opera-
tion. You can also use the Passeq as a „Multi-Mono“ or multi-chan-
nel plug-in, as long as your host program supports this function.
To Next Page
Loading...
