Phonitor 2
11
Introduction
Special Features
• The Reference – the Phonitor 2 sets new technical and sound
standards.
• For loudspeakers and headphones – two-channel 120 Volt amp for
headphones and active loudspeakers or power amps
• For all types of headphones – dynamic, balanced, electrostatic
• Optimally suited for low-impedance headphones starting from
10 ohms (40 ohms for balanced headphones)
• Remote volume control with motor potentiometer
• High-resolution laterality correction compensates right/left volume
differences.
• Switchable level adjustment (consumer to professional level, 1:1,
+6dB, +12 dB)
Applications
• Stereo preamplification and headphone amplification for three
sources
• High-quality music playback at home
• Central monitoring unit in professional environments with all clas-
sic features like phase reverse, solo, mono
• Re-Amping (for example, level boost after analog master
processing)
• Headphone amplifier for all headphone systems and impedances
• Loudspeaker-like reproduction with headphones
• Monitoring alternative in studios and mobile units
• Adjustment of headphone playback to match familiar monitor
speakers
• Mobile reproduction of usual monitoring conditions
To Next Page
