SPL Phonitor 2 1280 - Specifications

30
Phonitor 2
Specications
Inputs
XLR connectors, electronically balanced
Impedance: bal. ca. 20 kohms, unbal. ca. 10 kohms
Max. Input Level: +32,5 dBu
Outputs
Monitor/Line Outputs: XLR connectors, electronically balanced
Frequency Range: 4 Hz to 480 kHz ( -3 dB)
CMR: -82 dBu
At 1 kHz, 0dBu input level and unity gain
Crosstalk at 1 kHz: -106 dB
THD&N at 1 kHz: 0,00085 %
At 0dBu input level and unity gain, 1 kHz, 100 kohms load
Noise: Unweighted -101,87 dB
A-weighted - 104,76 dB
CCIR: -96,1 dB
Dynamic Range: 134,37 dB
Headphone Output
6,3-mm TRS connector
Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
Impedance: 0,18 ohms
Attenuation Factor: 180 @ 40 ohms
Frequency Range: ‹10 Hz to ›480 kHz ( -3 dB)
CMR: -82 dBu
At 1 kHz, 0dBu input level and unity gain
Crosstalk at 1 kHz: -106 dB
THD&N at 1 kHz: 0,00091 %
At 0dBu input level and unity gain, 1 kHz, 100 kohms load
Noise: Unweighted -101,12 dBu
A-weighted - 103,98 dBu
CCIR -95,02 dBu
Dynamic Range: 133,62 dB
Power Amplier
Max. Output Power:
2x 1 W (+30 dBu) at 1 kHz and 600 ohms connected impedance
2x 2 W (+30 dBu) at 1 kHz and 300 ohms connected impedance
2x 3,7 W (+30 dBu) at 1 kHz and 120 ohms connected impedance
Power Supply
Voltages: 230 V AC, 50 Hz / 120 V AC, 60 Hz
Power Consumption: max 23,7 VA
Fuses: 100-120 V AC: T 1 A/200-240 V AC: T 500 mA
Measurement & Weight
Height x Width x Depth (mm): 99 x 277 x 305
Weight: 4,3 kg
0 dBu = 0,775 V. Specications subject to change without notice.