- Moisten with water the rear of the tank where
it meets with the seal to facilitate the
reassembling procedures (see Рис.37);
Рис.
37
- Reassemble the bowl by positioning it back
into its seat, verifying that it faces in the correct
direction and it is held in place by its seal (see
Рис.38).
Рис.
38
- Fix the bowl by reinsert the knobs (Рис.39).
I
M
P
O
R
T
AN
T
Do not over
tighten
the bowl
kno
b
s
.
Excessive
force could damage the
t
h
r
ead
a
n
d
/
o
r
the bowl
i
t
s
e
l
f
.
Рис.
39
- Re-insert the tap (Рис.40) spreading
Vaseline on the o-rings to facilitate sliding the
tap in its seat until completely inserted.
!
W
a
r
n
i
n
g
!
If the tap does not perfectly slide into
position,
the sealing hold will be
endangered.
- Reassemble the accessory to give a “star”
peculiar shape to the dispensed product.
- Reassemble the drip tray.
Рис. 40
To Next Page
Loading...
