SPRIANO SST70 - Page 28

OPERATING MANUAL
MN-SST70
ED-19-01
SPRIANO® TECHNOLOGIES - www.spriano.it – spriano@terranova-instruments.com
a TERRANOVA® Srl brand - www.terranova-instruments.com - VAT IT07848810151
Factory & Sales: Via Gramsci 1 – 26827 Terranova dei Passerini (LO) – Italy
Head Office: Via Rosso Medardo 16 – 20159 Milano – Italy Ph: +39 0377 919119 – Fax: +39 0377 855720
Pag.28/52
Function
Display name
Use
Choice span
Expert
command:
Span Value URV
SPAN URV
Indicates and allows
manual entry of the
linear correction value
for the URV value.
0.500 – 2.00
Three decimal
places
Zero re-setting
OFFSET
Set the current
measurement to zero,
manually calculating the
required zero elevation.
-
Expert
command:
Manual zero
elevation
ZERO ELEV.
(disabled in
volumetric flow
meters mode)
Indicates and allows
manual entry of zero
elevation value.
6 digits,
including “–“
sign and decimal
point
Expert
command:
Heavier
specific gravity
HEAVIER SG
Indicates and allows
manual entry of heavier
specific gravity value.
0.1 ÷ (displacer
density)
Expert
command:
Gas or liquid
lighter specific
gravity
LIGHTER SG
Indicates and allows
manual entry of lighter
specific gravity value.
0.0 ÷ (HEAVIER
SG – 0.1)
Factory setting
restore
RESTORE
Select and confirm using
buttons  and [OK].
-
INFORMATION!
The password is in 4 digits format and spans from 0000 to 9999. If you can’t
remember or find the password you set, please contact our technical department.