SPRIANO® TECHNOLOGIES - www.spriano.it – spriano@terranova-instruments.com
a TERRANOVA® Srl brand - www.terranova-instruments.com - VAT IT07848810151
Factory & Sales: Via Gramsci 1 – 26827 Terranova dei Passerini (LO) – Italy
Head Office: Via Rosso Medardo 16 – 20159 Milano – Italy Ph: +39 0377 919119 – Fax: +39 0377 855720
7 MARKING
On the transmitter enclosure is fixed an identification plate with inscriptions showing the
characteristic data of the instrument.
Refer to Figure 29, the Transmitter is provided with the following information:
1. Name and address of the manufacturer
2. CE marking followed by the identification number of the notified body involved in the
production phase
3. Designation of series or type
4. Serial number (with the Year of construction)
5. ATEX marking for equipment-group II, followed by the specific marking of
explosion protection (see 1.3 Definitions And Symbols)
6. PED essential allowable limits: allowable Fluids, Maximum working pressure (PS),
Nominal size (DN), etc.
To Next Page
Loading...
