SPRT SP-L36 - 3.2.4 Paper Feeding (Manual Feeding)

6
tone and LCD shows “Loading...”, loosen 【POWER】 button first and then
release
【
FEED
】
, the self-test will be printed out.
3.2.4 Paper Feeding (Manual Feeding)
A. Standard Mode:
Under the normal work status and apply to thermal receipt paper, press
【FEED】button, the paper feeding begins, and stops when loosen 【FEED】
button. When the printer apply to black mark paper and label paper, press
【FEED】button, the printer begins to feed paper and stops over the position of
black mark/label spacing. If the paper is not the black mark/ label paper, the
printer stops automatically after feeds paper for 26cm, and alarms the error of
paper end for label paper.
B. Logistics Mode:
Under the normal work status and apply to receipt, press
【
FEED
】
button, the
paper feeding begins, and stops when loosen
【
FEED
】
button. When the printer
apply to invoice and waybill, press
【
FEED
】
button, the printer begins to feed
paper and stops over the position of black mark/label spacing. If the paper is
not the black mark/ label paper, the printer stops automatically after feeds
paper for 26cm. And alarm the error of paper end for waybill.
3.2.5 Hexadecimal Printing
The function of hexadecimal printing is to print the data which received from
host machine by hexadecimal numbers and corresponding characters. It will
be convenient to debug program.
Enter hexadecimal printing mode: Power off, hold down the
【
MODE
】
button
and press the
【
POWER
】
button at the same time. Then loosen the
【
POWER
】
button and press the
【
FEED
】
button when you hear ‘one low one high’
prompt tone of power on and LCD shows “Loading...". After that you may
loosen the 【 MODE 】 button and 【 FEED 】 button. The printer enter the
hexadecimal printing mode and print the notice.
Exit hexadecimal printing mode:The way to exit hexadecimal printing mode is
switch off the printer or press the 【FEED】 button for three times. The printer
will also print the notice which shows that the printer have exit hexadecimal
printing mode.
3.2.6 Printer Parameters Setting
Some simple parameters of the printer can also be set by operating buttons.
There are two methods of entering parameter setting mode, which can set