SPRT SP Series - Page 46

46
Characters following this command are printed at twice their normal width, does not enlarge the
height. Notice：the command only be effective in one line.
FS DC4 Cancel Chinese Double Width Print*
Format：ASCII： FS DC4
Decimal： 28 20
Hexadecimal： 1C 14
Explanation： This command is to cancel FS SO command.
FS W Set the Enlarging Multiple of Chinese Character
Format：ASCII： FS W n
Decimal： 28 87 n
Hexadecimal： 1C 57 n
Explanation：
Characters following this command are printed at twice their normal width and height. When n=1,
this command is selected, when n=0, it is canceled.
FS J Set Vertical Print
Format：ASCII： FS J
Decimal： 28 74
Hexadecimal： 1C 4A
Explanation：
This command is to print Chinese characters vertically, namely printing by
rotating widdershins for 90
o
FS K Set Horizontal Print
Format：ASCII： FS K
Decimal： 28 75
Hexadecimal： 1C 4B
Explanation：
This command is to print Chinese characters horizontally, if have not set
rotation, the Chinese characters will be printed horizontally, that is normal print status.
FS I Set Chinese Character Rotational Print
Format：ASCII： FS I n
Decimal： 28 73 n