SPRT SP Series - Chapter 1 Feature and Performance; 1.1 Features; 1.2 Performance Index

6
Chapter 1 Feature and Performance
1.1 Features
◇ Adopt impact dot-matrix print method.
◇ Special design for available being installed on the vertical panel of the instrument or
equipment conveniently.
◇Comes with single - chip processor,have standard parallel or serial,could online use with
various microcomputers or smart instruments conveniently.
◇Real time commands to print chinese、character、figure and others,also can print standard
6×7ASCIIcharacter and 16×16、12×12 chinese.Command set could
compatible with traditional
printer.
◇Speed have 1.2line/s、0.7line/s、0.4 line/s、2.5 line/s、1.5 line/s by model.
◇Self-test ,print full codes,character has high definition and elegant fonts.
◇ Power DC 5V±5%,1.5A
◇Operation temp 0~50℃
◇Can work under DOS and Windows interface.
1.2 Performance Index
◇Print Method: impact dot-matrix
◇ Print paper: plain white paper,width: 44.5±0.5mm or 57.5±0.5mm
Inner diameter: 40mm (max.)
Outer diameter: 80mm (max.)
◇GB level I, II Chinese fonts library.
◇ Enough buffer 32K
◇Print font: total 448 characters, including 96 ASCII characters, Greek,
German, French letters, Russian, Japanese katakana and partial Chinese
characters, mathematics symbols, print symbols and graphic symbols
◇Character structure: ANK: 6×7 dots、Chinese: 8×16 or 6×12,
Chinese character: 16×16/12×12
◇Graphic symbols: 6×8 dots