SPX Radiodetection RD7000+ - Transmitter Power Output and Boost

RD7000+ Operation Manual 11
3.14 Transmitter power output
The transmitter supports several power output modes to
help you select the optimal settings for your requirements
whilst helping to prolong battery life.
3.14.1 Adjusting power output
To adjust the power output:
Switch on the transmitter.
Press the or keys to increase or decrease
power output.
3.14.2 Boost (Tx-3 and Tx-10 only)
Boost allows the transmitter to output its maximum
wattage for a specied period of time in minutes.
WARNING! The transmitter is capable of
outputting potentially lethal wattages. Exercise
extreme caution when using Boost.
To configure boost:
Switch on the transmitter.
Press the key to enter the menu.
Scroll to the BOOST option using the or arrows.
Press the key to enter the BOOST menu.
Set the BOOST duration using the or arrows.
You can choose 5, 10, 15 and 20 minute periods.
Press the key to accept your changes and exit the
BOOST menu.
Press the key to exit the menu.
To enable boost:
First congure the boost duration using the procedure
above.
Press and hold the arrow until BOOST appears on
the transmitter LCD.
The transmitter will automatically exit boost mode
after the allotted duration.
To disable boost:
Press and hold the arrow to switch boost off.
1.
2.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
1.