SPX RADIODETECTION RD8200SG - Pairing Bluetooth Modules

© 2023 Radiodetection Ltd 21
5.2 Pairing Bluetooth Modules
Pairing Bluetooth Modules
The RD8200SG is fitted with multiple Bluetooth
modules. You need to connect to 2 Bluetooth modules
to enable survey grade accuracy and send Survey
Measurements to your compatible Android device
1. GNSS Bluetooth module.
This Bluetooth module enables survey grade accuracy.
2. Locator Bluetooth module.
This Bluetooth module allows you to send locator
Survey Measurements to compatible Android device
4. Select the RTK82SG-XXXXXX in Available
devices.
5. When asked for a passkey, enter 1234.
Pairing GNSS Bluetooth to an Android Device
The GNSS Bluetooth module is always on and does not
need to be enabled in the locator.
Switch on the RD8200SG locator. On your Android device:
1. Navigate to Settings > Bluetooth.
2. Ensure that Bluetooth connectivity is switched on.
3. Scan for a new device to add to the list of paired
device
6. RTK-82SG-XXXXXX should now be shown in
Paired devices
NOTE: If the GNSS Bluetooth module is
not advertising, you can reset the
Bluetooth module via MENU > GPS >
RTK > RESET.