© 2023 Radiodetection Ltd 22
5.3 Pairing Locator Bluetooth
to Android Device
Pairing Locator Bluetooth to Android Device
Please refer to the 'To navigate menus' within the
operation manual
1.
Set unit for pairing mode: Press > > SMLOG >
> > PAIR >
2.
Press the key on locator to start pairing cycle.
3.
On the Android device, navigate to Settings >
Bluetooth.
4.
Scan for a new device to add to the list of paired
devices.
5.
Select the 82SG-XXXXXX in Available devices.
6.
When asked for a passkey, enter 1234.
7.
82SG-XXXXXX should now be shown in Paired
devices.
To enable survey grade accuracy,
Bluetooth pairing to both the locator and
GNSS antenna is required.
To Next Page
Loading...
