Spypoint FORCE-20 - Preparation Steps; Select a Power Source

The specifications and characteristics of similar models may vary. Refer to the website or packaging for details.
PREPARATION
The camera was designed to operate with an SD card, class 10, between 2 and 32 GB of memory.
SELECT A POWER SOURCE
Make sure to insert the AA batteries according to their polarity (+) and (-).
FOR MAXIMUM PERFORMANCE AND WITHOUT LEAKING BATTERIES
Use new batteries.
Use ONLY alkaline or ONLY lithium batteries.
Do not mix new and old batteries.
Do not use rechargeable AA batteries, as their lower voltage may cause operating difficulties.