9
ENGLISH
OPERATION
Once the setup is complete, turn the button from SETUP to ON.
You may also switch from SETUP to OFF and turn the device
ON later.
RED LIGHT ON THE FRONT OF THE CAMERA
When the switch is in the SETUP position, the red light will
flash to confirm a motion detection once you have adjusted
your settings.
When you move the switch to the ON position, the red light at
the front of the camera will flash for 30 seconds to allow you to
move out of the camera's field of view.
When the light turns off, the camera is ready for use.
INSTALLATION
Recommended height of installation:
The camera must be installed at the height of the centre line
of the animal’s body.
Ideal setup for high-quality images and videos:
The target animal should be 7.5 m from the camera to get
a better line of sight.
To produce brighter photos at night, there sould be items
reflecting the camera's flash in the background.
Please note that the camera should never be directly pointed
at the sun to avoid back lighting and faulty detections.
To Next Page
Loading...
