11
ENGLISH
INSTALLATION WITH THE SUPPLIED STRAP
The dimensions of the included strap are
2.5 cm (1’’) X 152 cm (60’’).
1. Thread the strap through the strap slot found on the back
of the camera.
2. Wrap the strap around the tree then press and hold down
the latch.
3. Thread the strap through the latch from behind, as shown
below.
Recommended height of installation:
The camera must be installed at the height of the centre line
of the animal’s body.
Ideal setup for high-quality images and videos:
The target animal should be 7.5 m from the camera to get
a better line of sight.
To produce brighter photos at night, there sould be items
reecting the camera's ash in the background.
Please note that the camera should never be directly pointed
at the sun to avoid back lighting and faulty detections.
To Next Page
Loading...
