Need help?Do you have a question about the SRAM DUALDRIVE and is the answer not in the manual?
General| Brand | SRAM |
|---|---|
| Model | DUALDRIVE |
| Category | Bicycle Accessories |
| Language | English |
Detailed steps for adjusting the gear hub and rear derailleur, including limit screw settings.
Specific instructions for adjusting 'H' and 'L' limit screws on the derailleur for proper cog alignment.
Explains how to set the chain gap using the b-adjust screw for optimal shifting performance.
Steps for adjusting cable tension via the shifter barrel adjuster to ensure accurate index shifting.
Step-by-step guide on how to remove the rear wheel, including shifter and Clickbox operations.
Instructions for refitting the rear wheel, including washer placement and axle nut tightening.
Instructions for replacing cables and housing for the twist shifter.
Detailed procedure for changing cables on the thumb shifter, including cover removal and anchor bolt tightening.
Guides on assembling the hub, including spoke protector, cassette, and shifting rod installation.
Instructions for attaching the rear derailleur, checking hanger alignment, and ensuring b-adjust tab clearance.
Steps for mounting the shifter onto the handlebar, including barrel adjuster positioning and clamp bolt tightening.
Guide for fitting the cable and installing the Clickbox onto the hub axle, including lever and button positioning.
To Next Page
