SRM X-Power - Using X-Power

12
USING X-POWER
Before the rst ride! Spin the X-Power pedals to turn them on and connect to your bike computer. See page 14 on
how to pair your pedals to your bike computer. See page 15-16 on how to mount the cleats and adjust the bindings
according to your needs. Practice engaging and disengaging, rst at a standstill and then while riding in a safe location.
Zero load calibration
In order for the pedals to measure the correct power, you should perform a zero calibration before starting the ride. Trigger
the calibration with the X-Power app or with your bike computer. Search the sensor menu and select the X-Power pedals.
Calibration button should be available inside the menu. When paired via Bluetooth
®
make sure both pedals are calibrated
separately.
Temperature compensation
The X-Power pedals are temperature compensated, but should not be exposed to any major temperature changes during
the zero load calibration process. The pedals react very quickly to changes in temperature which can lead to measurement
errors if the calibration is performed incorrectly.
I WHAT DOES IT MEAN EXACTLY?
If the bike was stored in the garage over night, you should perform the calibration process here - especially if the outside
temperatures are signicantly di󰀨erent (hot or cold).