Srne ML Series User Manual

Voltage
8 FLOAT CHG Floating Charging
Voltage
9.0
～
17.0V 13.8V
9 BOOST-RE CHG Boost charging
Recovery to
Voltage
9.0
～
17.0V 12.6V
10 LOW VOL RECT Over-Discharge
Recovery
9.0
～
17.0V 12.6V
11 UND VOL WARN Under-Voltage
Warning
9.0
～
17.0V 12.0V
12 LOW VOL DISC Over-Discharge
Voltage
9.0
～
17.0V 11.0V
13 DISC LMT VOL Over-Discharge
Limit Voltage
9.0
～
17.0V 10.5V
14 LVD DELAY Over-Discharge
Delay Time
1
～
30s 5s
15 EQUALIZ TIME Equalizing
Charging Duration
Time
0
～
600Min 120Min
16 BOOST TIME Boost Charging
Duration Time
10
～
600Min 120Min
17 AUTO EQUALIZ Equalizing
Charging Interval
0
～
255D
（
0 refers to
close equalizing charging
function
）
30D
18 T-COMP SLOPE Temperature
Compensation
Coefficient
0
～
5
（
0 refers to close
compensation function
）
-3mv/℃/2V
19 L-CON-VOL Light Control
Voltage
4
～
40V 5V
20 L-CON-DELAY Light Control
Delay Time
1
～
60Min 5Min
21 BAUD RATE Communication
Baud Rate
1200-115200 9600
22 MODBUS ADDR Modbus Address 1-250 1
23 RS232 ADDR RS232 Address 1-65530 1
24 BACK-LIGHT Back-Light Delay
Time
Steady on/10-60Sec 10Sec
25 RESTORE DEFAVLT Restore Factory
Default Setting
table
3-8 (All parameters under User can be set and viewed.)
3.9 Production Information Page
You can check the controller model, serial number, software and hardware version etc. to
learn about the product. For detailed information, please see Diagram 3-9.
System Information
No. Name Item Parameter Example Example Note

Srne ML Series Specifications

General

Brand	Srne
Model	ML Series
Category	Controller
Language	English