SSANGYONG REXTON User Manual

INSTRUMENTS AND CONTROLS 3–37
Accelerating with Cruise Control System
• While cruise control system is running
1. Push up the ACCEL.SET. switch of a
cruise control lever and hold it until the
desired speed is reached without an
acceleration pedal intervention.
2. When the desired speed is reached,
release the lever.
• While cruise control system is not run-
ning
1. Accelerate using the acceleration pedal
more over 36km/h.
2. Push up the ACCEL.SET switch of a
cruise control lever and hold it.
3. And then release the acceleration pedal,
slowly.
4. When the desired speed is reached,
release the lever.
• Tap up while cruise control system is
running
1. Push up the ACCEL.SET. switch of a
cruise control lever less than 0.5 sec-
ond per one switching while the cruise
control system is running. This is a tap
up switching.
2. When you operate a tap-up switching,
the vehicle is accelerated for 1.3km/h
over the previous set speed.
3. If you want to accelerate for 13km/h, op-
erate the tap-up switching ten times
without accelerating with cruise control
system.
Decelerating with Cruise Control System
• While Cruise control system is running
1. Push down the DECEL.SET. Switch of a
cruise control lever and hold it until the
desired speed is reached without a
brake pedal intervention. But the cruise
control system cannot maintain the
cruise function at less than 34km/h.
2. When the desired speed is reached,
release the lever.
• When Cruise control system is not run-
ning
1. Push down the DECEL.SET. Switch of a
cruise control lever and hold it.
2. And then release the acceleration pedal,
slowly.
3. When the desired speed is reached,
release the lever. But the cruise control
system cannot maintain the cruise func-
tion at less than 34km/h.
New Rexton03_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:31Page 37 Adobe PageMaker 6.5K/Win

SSANGYONG REXTON Specifications

General

Brand	SSANGYONG
Model	REXTON
Category	Automobile
Language	English