SSS Siedle Siedle Scope S 850-0 - Control Device

21
•Select Door entry using the con-
trol buttons.
•Conrmbypressingtheleft-hand
display button OK.
•Select Control device entry using
the control buttons.
•Conrmbypressingtheleft-hand
display button OK.
The function number is pre-assigned
by your selection.
Select this using the lower control
button.
Now save your complete entry by
pressing the left hand display button
Save.
New entry
Name
Type
Door
Function
3
OK Back
Door
Select this function type if the func-
tion is to be used to dial a door.
New entry
Name
Type
Function
3
OK Back
Control Device
Select this function type if the func-
tion is to be used to switch a control
device.
Function
Assignment to the required func-
tion number is carried out in the
Function submenu. The function
number must be identical with
the programmed value in the bus
programmingsoftwareBPS650-...;
in total up to 15 functions can be
programmed.
New entry
Name
Type
Function
3
Save Back
Main menu
Intercom settings