Getting started UM0462
4/14
1 Getting started
1.1 Package contents
The following items are supplied in the Flash loader demonstrator package:
1.1.1 Software contents
1. STBLLIB.dll: a dynamic link library implementing the system memory bootloader
protocol and the COM communication APIs.
2. Files.dll: a dynamic link library implementing the needed file manipulation APIs to load
and store binary, hexadecimal and motorola S19 files.
3. STMicroelectronics flash loader.exe: a wizard application that provides the high-level
operations that can be performed by the user.
1.1.2 Hardware contents
This tool is designed to work with all STMicroelectronics devices that support the system
memory bootloader protocols. For more details, please visit the STMicroelectronics website
(http://www.st.com) and refer to the application note AN2606: “STM32F101xx and
STM32F103xx system memory boot mode”.
1.2 System requirements
In order to use the Flash loader demonstrator with the Windows operating system, a recent
version of Windows, such as Windows 98, Millennium, 2000, XP or Vista, must be installed
on the PC.
The version of the Windows OS installed on your computer may be determined by right-
clicking on the “My Computer” icon on the desktop, then clicking on the “Properties” item in
the displayed pop-up menu. The OS type is displayed in the “System Properties” dialog box
under the “System” label as shown in Figure 1.
To Next Page
Loading...
Need help?
General
