UM2407 Rev 2 45/50
UM2407 Nucleo-144 boards information
49
9.3 Known limitations
Revision C-01
The IDD measurement of the STM32H7x3 MCU cannot be done in standby mode because
of ETH PHY U15 and the pull-up resistors (R40/R43/R46/R47/R48) supplied by VDD_MCU.
Revision E-01
The IDD measurement of the STM32H7x3 MCU can be measured in standby mode. The
ETH PHY is powered from VDD and is separated from VDD_MCU.
The silkscreen has been corrected on the morpho connectors.
To Next Page
Loading...
