ST X-NUCLEO-53L8A1 User Manual

Setup & Demo Examples
NUCLEO Kit driver installation
1. Connect the P-NUCLEO to the PC through USB
• Wait for the board to be recognized;
the drivers are installed automatically)
• If Windows cannot install automatically the
STLINK driver, please follow step 2
2. Install the PC USB port driver to detect the Nucleo board
• Download STSW-LINK009 from www.st.com
• Unzip and double click on “stlink_winusb_install.bat” to install the driver
9

ST X-NUCLEO-53L8A1 Specifications

General

Brand	ST
Model	X-NUCLEO-53L8A1
Category	Computer Hardware
Language	English