S6
INSTRUCTIONS
DIGITAL SPEEDOMETER MK2, UNIVERSAL
EN
22
If you don’t reach the target
speed or stop accelerating
during the test, press the
Adjust Button to stop the
timer. Then press the Adjust
Button to clear the record
and enter the target speed
timer again.
5.1 Target Speed Timer Test
5.2 Target Distance Timer Test
• In the main screen, press and hold
the Adjust Button for 3 seconds to
switch the instrument to timer mode.
• In the Power Test screen, press the
Select Button 1 time to enter the
target speed timer screen.
• As soon as the scooter moves, the
timer will start automatically.
• Press the Adjust Button to clear the
record and enter the target speed
timer.
• E.g.: The stored record is displayed:
the target speed timer was set to
measure the time needed to reach
110 km/h, the test result was 19.20 s.
The max. RPM during the test was
10,000 RPM.
Please only use this function on
race tracks to avoid accidents!
WARNING
Please start the test while the scooter is standing still.
NOTE
To out how to adjust the Power
Test timer settings, please see 4.2.
NOTE
In order to save a record and get back to the main screen, press
and hold the Select Button for 3 seconds.
NOTE
If there already is a power test
record stored, it will be displayed
now. Before starting a new test,
the old record will have to be
cleared.
The timer is automatic; it
will start as soon as your
scooter starts moving
and stop as soon as your
scooter stops.
• Once the target speed has been
reached, the timer will stop counting
automatically.
• To perform another test, press the
Adjust Button to clear the record and
enter the target speed timer again.
The will keep
throughout the test.
In order to save a record and get
back to the main screen, press and
hold the Select Button for 3 seconds.
NOTE
• In the main screen, press and hold
the Adjust Button for 3 seconds to
switch the instrument to timer mode.
• In the Power Test screen, press the
Select Button 2 times to enter the
target distance timer screen.
• Press the Adjust Button to clear the
record and enter the target distance
timer.
• E.g.: The stored record is dis-
played: the target distance timer
was set to measure the time need-
ed to cover 4/32 of a mile (200 m),
the test result was 10,27 s. During
the test, top speed was 63 km/h;
max RPM was 8,000.
Please only use this function on
race tracks to avoid accidents!
WARNING
Please start the test while the scooter is standing still.
NOTE
In order to save a record and get back to the main screen, press
and hold the Select Button for 3 seconds.
NOTE
If there already is a power test
record stored, it will be displayed
now. Before starting a new test,
the old record will have to be
cleared.
0 km/h 3 km/h Speed up 110 km/h
0 km/h 3 km/h Speed up Test fail
To Next Page
Loading...