Stager FD Series - Spark Plug; Maintenance of Fuel Filter Cup

9.2 Spark plug
1. Withdraw the spark plug cap from the spark
plug.
2. Dismantle the spark plug by means of a
special tool.
3. Clear away carbon fouling around the spark
plug.
4. Check the spark plug gap and adjust it if
necessary. The gap should be 0.7~0.8mm.
5. Reinstall the spark plug and cap well.
Spark plug recommended: F6RTC.
9.3 Maintenance of fuel filter cup
1. Set the fuel cock to OFF, and dismantle the
fuel filter cup and gauze.
2. Fit the fuel filter cup gauze to the original
position.
3. Fit the fuel filter cup and gauze to the original
position.
Ver. 3/Rev. 1; Data: 21.10.2022 45