Stairmaster 8G - LCD Maintenance Mode Parameters; LCD Maintenance Mode Settings

Page 21
Item Min Max Default Notes
CHR PERCENT: (10-90) 10 90 70
LANG (ENG,,,,,,) N/A N/A English
Language is English (ENGL), Dutch
(DUTC), French (FREN), German (GERM),
Portuguese (PORT), Spanish (SPAN),
Swedish (SWED), Italian (ITAL) or
Katakana (KATA).
CSAFE (ON/OFF) N/A N/A ON Turns CSAFE function ON or OFF
AUTO FAN (ON/OFF) N/A N/A ON Turns AUTO FAN function ON or OFF
MODEL (STAIRCLIMBER/
STEPMLL /NTM CONFIG RQD)
N/A N/A
NTM
CONFIG
REQUIRED
Set console to STAIRCLIMBER/
STEPMILL/NTM CONFIG REQUIRED
PROGRAM STATS N/A N/A
DISPLAY TEST N/A N/A 0 Access to LCD Test function
KEYPAD TEST N/A N/A 0 Access to Keypad Test function
HEART RATE TEST N/A N/A
Access to Heart Rate System Test
function
SERIAL PORT TEST N/A N/A Access to Serial Port Test function
CSAFE TEST N/A N/A 0 Access to CSAFE Test function
FAN TEST N/A N/A 0 Access to Fan Test function
MEASUREMENTS N/A N/A
Access to Integral Measurements function
(for use by Authorized Maintenance
Technician)
LAST ERROR LIST N/A N/A
LCB COMM N/A N/A
Number of times a “LCB Communication”
condition occurred since last reset
STUCK KEY N/A N/A
Number of times a “Stuck Key” condition
occurred since last reset
BACKLIGHT 1 100 50
CONTRAST 1 100 50
SPM OVERFLOW N/A N/A
Number of times machine shut down due
to higher than expected step rate.
MAX SPM 110 140 120
KEY REPEAT ON OFF ON Turns KEY REPEAT function ON or OFF