Standard Change-Makers MC600 - Setting the Magnets for the Correct Cassette Locations

42
7.1.3 Setting The Magnets for The Correct Cassette Locations
Locate cassettes as shown. Each cassette has a magnet that is used to identify and verify that the correct
cassette is installed in the correct location. The top cassette should always be set to “A”, the second to
“B”, the third to “C” and the fourth to “D” if needed.
A
B
C
D
Slot locations for magnets.
See label inside.
A
B
C
Fourth Cassette Will
Be Placed Here If
Needed.
A
B
C
D