203729
Rev. E, 11/20/18
© 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED. 17 of 18
Attachment 2
Glass Panel Specifications
(Sheet 1 of 1)
The SX- and O-panels (provided by others) must meet the following specifications.
The panel widths and panel heights shown are to be specified on the order. To determine these dimensions
for standard size packages, see the Architectural Specifier sheets included in these instructions.
1.750" (without cladding) 44.5 mm
Color to be specified on the order.
4 Temper Specification Glass shall be fully tempered and shall meet or exceed Federal
specifications DD-G-001403 and DD-G-451d.
5 Warpage Glass warpage shall not exceed the tolerance specified in Federal
specification DD-G-001403.
6 Performance Glass shall comply with the requirements in the performance
specifications and methods of test for safety glazing materials used in
buildings as described in ANSI Z97.1-1975.
Weight of door shall not exceed 220 lbs 100 kg
The product of door weight (lbs) times the door width (inches) divided by
2 shall not exceed 5000 in. lbs.
Example:
If door weight = 200 lbs
And door width = 42
5
/
16
"
Then: 200 X 42.313 = 4231 in. lbs
2
OR
Kgs times the door width (m) divided by 2 shall not exceed 565 Nm
Metric Example:
If door weight = 100 kg
And door width = 1.1 m
Then: 100 X 1.1 X 9.8 = 539 Nm
To Next Page
Loading...