Stanley Dura-Glide 2000AG Series User Manual

Dura-Glide™ 2000AG All-Glass Sliding Door
Installation Instructions
Quick-Reference Guide
203729
Rev. E, 11/20/2018
Prohibition on Copying
Any unauthorized reproduction, disclosure or distribution of copies by any person of any
portion of this work may be a violation of copyright law of the United States of America
and other countries, could result in the awarding of statutory damages of up to $250,000
(17 USC 504) for infringement, and may result in further civil and criminal penalties. All
rights reserved.
Stanley Access Technologies
Quick-Reference Guide

Stanley Dura-Glide 2000AG Series Specifications

General

Brand	Stanley
Model	Dura-Glide 2000AG Series
Category	Door Opening System
Language	English

Summary

PURPOSE

Discussion

Provides installation instructions for the Stanley Dura-Glide 2000AG Series sliding door system, including breakout feature.

Applicability

Specifies the manual applies to the Stanley Dura-Glide 2000AG Series sliding door system.

PREREQUISITES

INSTALLATION INSTRUCTIONS

Installing the Header and Jambs

Instructions for installing the header and jambs, referencing another document.

Installing the Top and Bottom Rails onto the Glass Panel

Steps for attaching top and bottom rails to the glass panel, with warnings and notes.

Installing the O-Panel Breakout Switch

Procedure for installing the O-panel breakout switch, referencing another document.

Installing the Lag Bolts

Procedure for marking and installing lag bolts, referencing figures for mounting options.

Installing the O-Panel(s)

Steps for installing the O-panel, including rail attachment and pressure-sensitive pile.

Installing the SX Panel(s)

Instructions for installing SX panels, including attaching door holder assembly and setting wheels.

Installing the Weatherstripping

Detailed steps for applying weatherstripping to various edges and shoes of the panels.

Adjusting the SX Panels

Guidance on adjusting the SX panel height and anti-risers for proper door operation.

Adjusting Belt Tension

Procedure for setting the correct belt tension, including measurements and adjustments.

Adjusting the Full-Open Bumper Stops

Instructions for adjusting bumper stops to ensure both SX panels contact simultaneously.

Adjusting the SX Panel Emergency Egress Breakout Detents

Procedure for adjusting breakout detents for emergency egress functionality.

Adjusting the SX Panel Sag

Method for shimming the SX panel to eliminate sag and ensure proper alignment.

Wiring the Doorway Holding Beams

Instructions for connecting the wiring for the doorway holding beams.

Installing the SU-100 Motion Sensors

Procedure for installing the SU-100 motion sensors, referencing specific documents.

Closing Out

Final steps including tuning in the door and referencing relevant manuals.

Replacement Parts

Reference to Attachment 3 for a comprehensive list of replacement parts.