Stanley Dura-Glide 2000AG Series - Adjusting the SX Panel Sag; Wiring the Doorway Holding Beams

203729
Rev. E, 11/20/18
© 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED. 14 of 18
3.12 Adjusting the SX Panel Sag
3.12.1 IF SX panel sag adjustment is required, refer to Figure 11, and shim to ADJUST panel
sag.
3.13 Wiring the Doorway Holding Beams
3.13.1 Refer To doorway holding beam manufacturer’s instructions and CONNECT doorway
holding beam wiring.
Figure 11. Adjusting SX Panel Sag