10
• Turn on water supply at the faucet to completely
open.
• Make sure the “ON/OFF” switch is in the “OFF”
position. The power switch has international
symbols for ‘on’ and ‘off’: On (|) Off (O).
• Unwind the power cord completely and plug the
GFCI into a grounded 120 volt outlet.
• Release the safety lock button on the spray gun
by pressing the top half of the safety lock button.
While pointing the spray gun in a safe direction,
squeeze the trigger on the spray gun until there is a
steady stream of water, letting the water and air out
of the hose.
• Turn the power switch to the “ON” (|) position.
The unit will turn on for 1 - 2 seconds and shut off.
This is a normal function of the auto start feature.
Squeeze the spray gun trigger to begin pressure
washing.
Unlock
F
OFF/0
ON/I
OFF/0
ON/I
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
93902_16ARN027_1600_ENG-FR-SP.indd 10 16/12/14 下午5:46
To Next Page
Loading...
