or painted parts, or on pressurised components (e.g tyres,
inflation valves, etc.). Effective washing depends on both the
pressure and volume of the water used, to the same degree.
MAINTENANCE (FIG. E)
Any maintenance operations not covered by this chapter should be
carried out by an authorized sales and service centre.
Warning! Always disconnect the plug from the power
socket before carrying out any work on the appliance.
Cleaning the nozzle
1. Disconnect the lance from the nozzle.
2. Remove any dirt deposits from the nozzle hole using
the tool (4).
Cleaning the filter
Inspect the inlet filter (8) and detergent filter (if fitted) before
each use, and clean in accordance with the instructions if
necessary.
Unjamming the motor (On models with this feature)
In case of lengthy stoppages, limescale sediments may
cause the motor to seize. To unjam the motor, turn the
drive shaft with a tool.
End-of-season storage
reat the appliance with non-corrosive, non-toxic antifreeze
before storing it away for winter. Put the appliance in a dry
place, protected from frost.
STORAGE AND TRANSPORTATION (Fig. E)
Store the accessories as shown in Fig. E.
Transport the machine as shown in Fig. E.
HOW TO AVOID DAMAGING SURFACES
Warning!
f Using the appliance to wash tyres may damage the
tyre and can be dangerous.
f Never point the high pressure jet straight at the tyre.
f Always use the appliance at the lowest pressure setting
when cleaning in the vicinity of wheels and tyres.
f Never use the “Turbo Lance” for washing any part of
the vehicle.
f For further information refer to section: “Recommended
cleaning procedure”.
.PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should you
find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product available for
separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental pollution
and reduces the demand for raw materials. Local
regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the
retailer when you purchase a new product.
¡Important! To ensure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed
in this manual) should be performed by authorized service centers
or other qualified organizations, always using identical replacement
parts. Unit contains no user service able parts inside.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and authorized
service locations. All STANLEY Service Centers are staffed with
trained personnel to provide customers with efficient and reliable
power tool service. For more information about our authorized
service centers and if you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY location
nearest you.
ENGLISH
10
To Next Page
Loading...
